Ch 2 — Soil & Foundation Engineering
Add headings to create a table of contents. Learn more.
Ch 2 — Structural Design Fundamentals
Construction Engineer Master Reference | RahulNew 2026
Structural System Overview
Every building has a structural system — the skeleton that carries all loads safely from the roof to the ground. Understanding this system is the foundation of all site engineering work.
Slab → Beam → Column → Footing → Soil
All loads — dead load, live load, wind load, seismic load — travel down this path. Every structural element must be designed and executed correctly, or the entire path is compromised.
Soil Investigation — IS 1892:1979
Before any footing is designed, the soil must be investigated. Designing without soil data is guesswork.
2.1 Standard Penetration Test (SPT) — IS 2131
The SPT N-value is the most commonly used field test for soil bearing capacity in India.
N-value = Number of blows required to drive a standard sampler 300 mm into soil (after seating 150 mm)
N-Value
Soil Description
Safe Bearing Capacity (SBC)
Recommended Footing
< 5
Very loose sand / Soft clay
50 kN/sqm
Raft or Pile
5 – 10
Loose sand / Medium clay
50 – 80 kN/sqm
Raft recommended
10 – 20
Medium dense sand / Stiff clay
100 – 150 kN/sqm
Isolated footing standard
20 – 30
Dense sand / Hard clay
200 – 300 kN/sqm
Isolated footing shallow
> 30
Very dense / Weathered rock
400+ kN/sqm
Direct on rock
Black Cotton Soil
Expansive clay
50 – 80 kN/sqm
Raft — seasonal swelling
Foundation Design — Thumb Rules
3.1 Isolated Column Footing